Aligo QTX100 quad transmitter
Aligo QTX100

Aligo QTX100

Quad 4K Transmitter with SQX Encoding.

  1. Connects up to four HDMI 2.0 inputs (4K60) to your 10G AV network. Use in conjunction with a VSN controller to distribute up to 16 independent HD outputs per unit
  2. On-board SQX encoding enables compressed content to be sent to a 1G network
  3. Low latency KVM is supported for each source via the onboard USB 2.0 interfaces
  4. Independent routing of Video and embedded Audio channels
Slider

Introducing Aligo - Intelligent AVOIP

Aligo, Datapath’s AV over IP solution, provides pristine quality 4K content across a 10G network and compressed streams on 1G infrastructure at the same time, delivering unprecedented quality and flexibility in IP content distribution.


Pristinge Quality with DS10G

Aligo’s primary 10G channel delivers content using Datapath’s proprietary DS10G codec.

  • Engineered for pro-AV applications: Purpose built for use in professional, mission-critical installations.
  • Quality without compromise: DS10G delivers visually lossless content, with zero-latency 4K60 intra-frame encoding, optimised for switched distribution over 10Gb networks.
  • Built by Datapath: Benefitting from decades of video management and processing experience, DS10G has best-in-class signal acquisition, EDID handling, genlocking and mode management.
  • Reliability by design: Designed for critical applications, DS10G has built-in resilience against bit errors, jitter and dropped packets.

Simultaneous Live Streams

Aligo’s secondary 1G channel provides a compressed, secure live stream of every input.

  • Flexible Distribution over 1G
    Every input is provided as an SQX live stream encoded as HEVC (H.265) or AVC (H.264) as well as the primary DS10G stream.
  • Security First
    Encrypted streams are received only by legitimate users and decoded by pre-authenticated Datapath resources.
  • Configurable External Access
    RTSP streams can be configured by admin for remote viewing, archiving, or integration into third-party systems.

No Compromise Stream Management

  • Aligo always transmits sources to endpoints in pristine 4K. Endpoints that do not support 4K resolutions receive content in HD, a unique capability of the DS10G codec.
  • With DS10G, each 4K link can be used as four independent HD streams, which can be sourced from anywhere within an Aetria system.
  • All streams are genlocked to source, maintaining their suitability for IP based video walls.
  • AES bitstream encryption is maintained for all primary DS10G and secondary SQX streams.

Datapath’s DS10G codec allows a number of options for the flexible routing of video streams when handling mixed HD and 4K sources and displays. It allows customers to comfortably future-proof their project designs by catering for 4K sources and displays whilst still handling HD endpoints. This is done by minimizing the number of network switch ports required without ever compromising quality in any scenario.


Rack Mount Kit

A 1U rack mount kit supports Aligo RX100 (8 HD outputs) appliances. The rack mount kit:

  • is made from high quality and robust steel construction.
  • contains dual internal independent power supplies with full redundancy (load sharing).
  • has PSU failure signalling to external environment monitoring equipment.
  • and has cable management provided via rear cable clamps.

Powered By Aetria - Control Rooms Made Simple

Aligo is fully managed and controlled by Aetria, Datapath’s integrated solution for the design, management and operation of control rooms of any size.

Aligo RX100

Aligo RX100

Single 4K Receiver with Quad HD Outputs

Rack Mount Kit

Aligo RX100

A 1U rack mount kit supports two Aligo RX100 (8 HD outputs)

Slider

Aligo QTX100 Specifications

Video Input Connections 4 x HDMI 2.0 full size connectors
HDCP Support HDCP v2.2
HDMI Pixel Clock Maximum 600 MHz
HDMI Pixel Clock Minimum 25 MHz
Typical Resolutions, HD Stream Up to 150Mpixels/sec, maximum line length 2048
Examples:
1920x1080p 60Hz (SMPTE timings) 
1920x1200p 60Hz (CVT-Reduced Blanking)
2048x1080p 60Hz (CVT-Reduced Blanking)
Typical Resolutions, 4K Stream Up to 600Mpixels/sec, maximum line length 4096
Examples:
3840x2160p 60Hz (SMPTE timings)
4096x2160p 60Hz (CVT-Reduced Blanking)
Scan Type Progressive. Interlaced video not supported.
Video Sampling Formats [1] 10,12-bit modes coming soon RGB 8-bit, RGB 10-bit[1],YCbCr 4:4:4 8-bit, YCbCr 4:4:4 10-bit[1], YCbCr 4:2:2 12-bit[1], YCbCr 4:2:0
Streaming Codecs and Profiles DS10G by Datapath (visually lossless & low latency over 10Gb network)
Additional H.264 SQX streaming at source resolution for each port
Network Connections 4x 10Gb SFP+ Fiber ports (Lossless streaming interface), Note: Compatible 850nm multi-mode SFP modules are available as a separate accessory.
1x 1Gb RJ45 (Control/Management port)
1x 1Gb RJ45 (Media port for SQX streaming)
Multicast Streaming Support Each source is available at any number of displays in parallel. Requires IGMPv2 enabled at network switch.
Maximum Sources Per System At least 220 (UHD), 650 (HD)
Audio Support Transmit stereo HDMI embedded audio for each input independently routable to multiple sinks. The embedded audio consists of up to four channel pairs encoded in PCM format, up to 96KHz sampling.
KVM Support 4 x Type-B USB host ports for connecting to a USB host PC
HID device support (keyboard, mouse etc.) independently routable to sink
Power Consumption 35W
Mechanical 318 x 176 x 43 mm
Weight 1.8Kg
Relative Humidity 5%-90% non-condensing

Contact Sales

Datapath has a large network of distributors and resellers across the World.

Datasheets

Download the datasheets for your Datapath products - current and past.

Current & Past Products »

Downloads

Download the latest software for your Datapath products.

Current Downloads »
Legacy Downloads »

User Guides

Download the manual for your Datapath products - current and past.

Current & Past Products »